Encapsulated N08825 Chemical Injection Line Tubing Umfanekiso Featured

I-Ecapsulated N08825 Chemical Line Tubing yokuTofa

Inkcazelo emfutshane:

Omnye wemingeni ephambili kwiinkqubo ezinyukayo zeshishini leoli negesi kukukhusela imibhobho kunye nezixhobo zokusebenza ngokuchasene ne-wax, ukulinganisa kunye ne-asphalthane deposits.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukunyamezelwa kweDimensional

ASTM B704 / ASME SB704, Incoloyi 825, UNS N08825, Inconel 625, UNS N06625

ASTM B751 / ASME SB751

Ubungakanani OD	Ukunyamezela OD	Unyamezelo lwe-WT
1/8''≤OD<5/8'' (3.18≤OD<15.88 mm)	±0.004''(±0.10 mm)	±12.5%
5/8≤OD≤1'' (15.88≤OD≤25.4 mm)	±0.0075'' (±0.19 mm)	±12.5%

Meilong Standard

Ubungakanani OD	Ukunyamezela OD	Unyamezelo lwe-WT
1/8''≤OD<5/8'' (3.18≤OD<15.88 mm)	±0.004''(±0.10 mm)	±10%
5/8≤OD≤1'' (15.88≤OD≤25.4 mm)	±0.004'' (±0.10 mm)	±8%

ASTM B423 / ASME SB423, Incoloyi 825, UNS N08825

Ubungakanani OD	Ukunyamezela OD	Unyamezelo lwe-WT
1/8''≤OD<3/16'' (3.18≤OD<4.76 mm)	+0.003''(+0.08 mm) / -0	±10%
3/16≤OD<1/2'' (4.76≤OD<12.7 mm)	+0.004'' (+0.10 mm) / -0	±10%
1/2''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.005'' (+0.13 mm) / -0	±10%

Meilong Standard

Ubungakanani OD	Ukunyamezela OD	Unyamezelo lwe-WT
1/8'' ≤OD<3/16'' (3.18≤OD<4.76 mm)	+0.003''(+0.08 mm) / -0	±10%
3/16≤OD<1/2'' (4.76≤OD<12.7 mm)	+0.004'' (+0.10 mm) / -0	±10%
1/2''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.004'' (+0.10 mm) / -0	±8%

Imathiriyeli yokugquma

Inayiloni 11

-60C ukuya kwi-135C

Ukuxhathisa okulungileyo kwi-hydrocarbons, ukuxhathisa okulungileyo kwe-abrasion

Umboniso weMveliso

Ubungakanani beTubing obuqhelekileyo

Idayamitha yangaphandle yemigca yolawulo ubukhulu becala yi-3/8'' (9.53mm).

Ubunzima beendonga: 0.035'' (0.89mm), 0.049'' (1.24mm), 0.065'' (1.65mm), 0.083'' (2.11mm)

I-injection line tubing ifumaneka ngobude ukusuka kwii-400 ezinyaweni (i-122 yeemitha) ukuya kwii-32,808 ezinyaweni (i-10,000 yeemitha).Akukho zi welds orbitally butt.

Ezinye iinkcukacha (1/8'' ukuya ku-3/4'') ziyafumaneka xa ziceliwe.

Ubungakanani bobukhosi		Ubungakanani bemetriki
OD intshi	WT intshi	OD mm	WT mm
1/8 (0.125)	0.028	3.18	0.71
1/8 (0.125)	0.035	3.18	0.89
3/16 (0.188)	0.028	4.76	0.71
	0.035	4.76	0.89
	0.049	4.76	1.24
1/4 (0.250)	0.035	6.35	0.89
	0.049	6.35	1.24
	0.065	6.35	1.65
	0.083	6.35	2.11
3/8 (0.375)	0.035	9.53	0.89
	0.049	9.53	1.24
	0.065	9.53	1.65
	0.083	9.53	2.11
1/2 (0.500)	0.035	12.7	0.89
	0.049	12.7	1.24
	0.065	12.7	1.65
	0.083	12.7	2.11